How Much Should a Plumber Charge Per Hour?

Ask ten plumbers what they charge per hour and you will get ten numbers, and at least three of them will be too low. The problem is rarely skill. It is that most plumbers set their rate by looking at what the shop down the road charges, then knocking off ten dollars to win the job.
That works until the truck needs a transmission, the slow season hits, or you hire your first tech and realise the rate never covered a second wage. This guide covers what plumbers actually charge in the US and Canada right now, then shows you how to build your own rate from your real costs, so the number on your estimate pays you properly. All figures are checked as of November 2026 and sources are named next to each one.
The Short Answer: What Plumbers Charge in 2026
For standard residential work, most US plumbers charge somewhere around $75 to $150 an hour for labour, and most Canadian plumbers charge around CA$105 to CA$175 an hour. After-hours and emergency work runs higher, usually 1.5 to 3 times the daytime rate. Most shops also charge a trip or service call fee, or a minimum.
| Market | Typical hourly rate | Full range seen | Source (checked Nov 2026) |
|---|---|---|---|
| US, residential labour | $75 to $150 | $45 to $200 | Housecall Pro plumbing pricing guide |
| US, emergency or after-hours | $150 to $300+ | 1.5x to 3x standard | Housecall Pro plumbing pricing guide |
| Canada, national | CA$105 to CA$175 | CA$60 to CA$270 | HomeStars plumbing cost guide |
| Toronto, standard service | CA$95 to CA$150 | n/a | HomeStars Toronto cost guide |
These are what clients pay, not what plumbers take home. They also vary a lot by city. A master plumber in a high-cost metro and a newer plumber in a small town are both "average" in their own markets. Treat the table as a sanity check on your number, not a source for it.
Plumber Hourly Rate vs Plumber Wage: Why They're Not the Same Number
A lot of searches for "plumber hourly rate" are really two questions mixed together: what does a plumber earn, and what does a plumbing business charge? The difference between them is the whole business.
On the wage side, the US Bureau of Labor Statistics puts the median pay for plumbers, pipefitters and steamfitters at $30.67 an hour ($63,800 a year) as of May 2025, with the top 10% earning more than $108,420 a year (BLS Occupational Outlook Handbook). In Canada, the Government of Canada Job Bank (wages updated November 2025) shows a national median of CA$34 an hour, with Ontario at a median of CA$32.50 and a top wage of CA$50.38, the highest of any province (Job Bank, plumber wages). We break the Canadian numbers down by province in our plumber salary Canada guide.
So if a plumber earns about $31 an hour and the client pays $125, where does the other $94 go? Payroll taxes and workers' comp. The truck. Insurance. The hours your tech is driving, quoting, picking up parts and fixing callbacks, none of which you can bill. Office costs, software, marketing, and the owner's time. And then, finally, profit. If your rate only covers the wage, you are running a very expensive hobby.
What a Licensed Plumber Charges vs an Apprentice
Licensing changes what you can charge because it changes what you are allowed to do. In most US states and Canadian provinces, permit work, gas work and anything touching the building's main systems needs a licensed or certified plumber. Clients are paying for that liability as much as for the wrench.
Bob Vila's plumber cost guide (last updated June 2023, so treat it as a guide to the spread rather than today's prices) lists these typical bands:
- Apprentice: about $45 to $90 an hour
- Journeyperson: about $70 to $120 an hour
- Master plumber: about $90 to $200 or more an hour
If you run a mixed crew, you can price this way too: bill an apprentice's time at a lower labour rate, or keep one blended rate and let the apprentice handle the simpler tasks on a flat-rate job. Either way, your estimates should show the client a licensed professional is responsible for the work.
How to Build Your Hourly Rate From Your Costs
Here is the method that actually protects your margin. Instead of starting from the market, start from what one truck costs you to keep on the road for a year, divide by the hours you can realistically bill, and add profit on top.
The worked example below is illustrative. The wage is close to the Job Bank and BLS medians above, the insurance numbers are Insureon's plumbing figures (last updated November 2026), and the rest are assumptions you should replace with your own.
| Cost line (one truck, one tech, per year) | Amount | Notes |
|---|---|---|
| Tech wage: $32/hr x 2,080 paid hours | $66,560 | Close to US and Canadian medians |
| Payroll burden at 20% | $13,312 | Assumption; see below |
| Truck: payment, fuel, maintenance | $15,000 | Assumption |
| Insurance: general liability, commercial auto, tools | $5,688 | Insureon: $1,768 + $3,415 + $505 |
| Share of overhead: office, phone, software, marketing, accounting | $24,000 | Assumption |
| Total cost to run the truck | $124,560 |
Payroll burden is more than people think. In the US, the employer pays 7.65% in Social Security and Medicare on top of wages (IRS Topic 751). In Canada for 2026, the employer pays 5.95% CPP plus EI at 1.4 times the employee rate, which is CA$2.28 per CA$100 of insurable earnings (CRA CPP rates; CRA EI rates). Add workers' comp, unemployment insurance, vacation and holiday pay and any benefits, and 20% is a reasonable placeholder. Get your real number from your payroll provider.
Unbilled hours are where most plumbers go wrong. The tech is paid for 2,080 hours, but nobody bills 2,080. Drive time, supply runs, quoting, warranty work, training and slow days eat a big share. In this example we assume 60% of paid hours are billable, which gives 1,248 billable hours. Track your own for a month and you may find it is lower.
Now the math. Divide $124,560 by 1,248 hours and your break-even rate is about $100 an hour. Add a 20% net profit margin and you need $155,700 in labour revenue ($124,560 / 0.80), which over the same 1,248 hours is about $125 an hour.
That $125 sits right in the middle of the US market range and the lower half of the Canadian one. If your number comes out far above the market, look at your billable hours first; it is usually the cheapest thing to fix. If it comes out below the market, you are leaving money on the table. Materials should be marked up separately, not hidden in the labour rate. After each job, check the hours you actually spent against this number; job costing is how you find out whether the rate is holding up.
If you are a solo owner-operator, the method is the same. Replace the tech wage with the salary you want to pay yourself, keep the profit line separate, and be honest about how many hours you spend on the phone and doing paperwork rather than on the tools.
Hourly vs Flat Rate: Which Should You Use?
Once you know your hourly cost rate, you have a choice about how to show it to clients. Hourly billing charges for time plus materials. Flat-rate pricing quotes a fixed price per task, such as replacing a toilet fill valve or a water heater, built from your hourly rate times the expected hours plus materials and margin.
Most residential service plumbers move towards flat rate for common repairs, for good reasons. The client knows the price before you start, which kills the "you were slow on purpose" argument. A faster, better-equipped tech earns the business more per hour, not less. And flat-rate prices are easy to load into a price book, so every tech quotes the same job the same way.
Hourly still has a place. Diagnostics, renovations, old houses with surprises behind every wall, and commercial time-and-materials contracts are often fairer and safer on the clock. Many shops run a hybrid: flat rate for the 50 most common repairs, hourly for the rest. We ran the numbers on both models in flat rate vs hourly: which actually pays more.
Trip Fees, Minimums and Service Call Charges
Every visit costs you money before you open the toolbox: the drive, the fuel, the parking, and the time to diagnose. A trip fee or minimum covers that so a ten-minute fix does not lose money.
Consumer guides show how common these are. Housecall Pro's plumbing guide puts trip and service call fees at about $50 to $250 in the US, and HomeStars reports Canadian service call fees of roughly CA$140 to CA$475, usually with the first hour of labour included. There are a few ways to structure it:
- Flat trip fee charged on every visit, sometimes credited toward the repair if the client goes ahead.
- Minimum charge, often one hour of labour, so short jobs still cover the truck roll.
- Diagnostic fee for finding the problem, separate from fixing it.
- Distance-based fee for addresses outside your normal service area.
Whichever you choose, the number should come from your own cost per truck roll, not a competitor's ad. Our guide to minimum service fees walks through that calculation.
After-Hours and Emergency Rates
A burst pipe at 11pm is worth more to the client than a dripping tap on Tuesday morning, and it costs you more too: overtime, a tired tech, and a disrupted schedule tomorrow. Market guides consistently show after-hours rates at 1.5 to 3 times the standard rate, and Housecall Pro's guide lists emergency labour at around $150 to $300 an hour or more.
Decide your tiers in advance rather than on the phone. A common setup is standard rates during business hours, a higher evening and weekend rate, and the top rate for nights and statutory holidays, with an emergency dispatch fee on top. Put them in your price book so the person answering the phone quotes the same number every time. Our guide to pricing emergency service calls covers how to set and explain each tier without upsetting the client.
How to Talk About Your Rates With Clients
Clients rarely complain about a price they expected. They complain about a price that surprised them. That means the best time to communicate your rate is before you arrive: on the phone, in the booking confirmation, and in a written estimate.
A few habits make a real difference. Say the trip fee or minimum when the job is booked, not at the door. Send a written estimate with options, for example "repair the valve" or "replace the fixture", so the conversation is about which option and not about whether you are expensive. Get approval in writing before you start. And if you charge hourly, give a realistic range of hours rather than a single optimistic number.
If you need to raise your rates, do it once a year, with notice, and explain the reason in one sentence: costs went up and you want to keep the same quality of work. Most good clients accept that. The plumber who explains his price once is paid; the one who apologises for it is argued with.
Putting Your Rate to Work
Working out your rate is the hard part. Using it consistently is where most shops slip, because prices end up scattered across a notebook, the owner's memory and three old estimates. The fix is a price book: your hourly rate, flat-rate tasks, trip fees and after-hours tiers stored in one place and used on every estimate and invoice.
WorkZen's free plan includes a price book, estimates, invoicing, scheduling and job management for up to 3 users, so you can load your new rates and quote with them the same day. You can see how it fits plumbing shops on our plumbing software page, or compare plans on the pricing page.
Whatever tool you use, revisit the math once a year. Wages, insurance and fuel all move, and a rate that was right two years ago is probably quietly costing you money today.
Sources and Notes
- Wages: BLS Occupational Outlook Handbook, plumbers and Job Bank, NOC 72300.
- US market rates: Housecall Pro plumbing pricing guide (updated November 2026) and Bob Vila plumber cost guide (last updated June 2023).
- Canadian market rates: HomeStars Canada and Toronto cost guides, read through search summaries because the pages blocked direct access.
- Insurance: Insureon plumbing insurance cost. Payroll rates: IRS Topic 751, CRA CPP and EI pages.
- The worked rate example uses stated assumptions (payroll burden, billable hours, truck and overhead costs) to show the method. Use your own numbers.
Frequently Asked Questions
Ready to transform your field service business?
Start using WorkZen today. It's free to get started!


